|
CF-H
Series Specifications (go
to CMS-H Series specs)
|
Model |
CF500H |
CF750H |
CF850H |
CF1000H |
CF1500H |
| Grain
Column Length |
20
FT. |
20
FT. |
20
FT. |
20
FT. |
20
FT. |
| Dimensions
- includes low profile fold up wet bin.
|
|
|
|
| Transport
Length |
29'
- 2" |
29'
- 2" |
29'
- 2" |
29'
- 2" |
29'
- 2" |
| Transport
Width |
8' |
8' |
8' |
8' |
8'
|
| Transport
Height |
12'
- 10" |
12'
- 10" |
12'
- 10" |
12'
- 10" |
12'
- 10" |
| Installed
Length * |
27' |
29'
- 10.5" |
29'
- 10.5" |
29'
- 10.5" |
29'
- 10.5" |
| Installed
Width * |
8' |
11'
- 2" |
11'
- 2" |
11'
- 2" |
11'
- 2" |
| Installed
Height ** |
14'
- 6" |
24'
- 5" |
24'
- 5" |
25'
- 10" |
37'
- 2" |
| *with
service platform and buttress system |
|
**above
foundation |
| |
| Fan(s) |
2 |
3 |
3 |
4 |
6
|
| |
36",
10-16HP |
36",
10-16HP |
39",
20HP (1) |
36",
10-16HP |
36",
10-16HP |
| |
|
|
36",
10-16HP (2) |
|
|
| |
1750RPM |
1750RPM |
1750RPM |
1750RPM |
1750RPM |
| |
|
Heater(s)
BTU/HR(MM) |
9.2 |
13.8 |
15.2
|
18.4 |
27.6
|
| |
| Augers
|
| Top
Auger (HP/BPH) |
7.5HP/3200 |
10HP/3200 |
10HP/3200 |
10HP/3200 |
10HP/3200 |
| Bottom
Auger (HP/BPH) |
5HP/1370 |
5HP/2140 |
5HP/2140 |
7.5HP/2590 |
7.5HP/2590 |
| |
| Metering
Roll Drive |
1/3HP
DC SCR |
1/3HP
DC SCR |
1/3HP
DC SCR |
1/3HP
DC SCR |
1/3HP
DC SCR |
| |
| Electrical
Load (MRA) - Excludes auxiliary load and unload equipment
amps |
|
| Single
Phase 230 Volt |
230 |
325 |
- |
- |
- |
| Three
Phase 230 Volt |
120 |
170 |
186 |
216 |
298 |
| Three
Phase 460 Volt |
60 |
85 |
93 |
58 |
149 |
| |
| Drying
Capacity (BPH) |
|
| Dry
& Cool 25% to 15% |
265 |
600 |
635 |
800 |
1095 |
| Dry
& Cool 20% to 15% |
460 |
930 |
1040 |
1425 |
1715 |
| Full
Heat 25% to 15% |
595 |
941 |
1068 |
1190 |
1785 |
| Full
Heat 20% to 15% |
1010 |
1590 |
1744 |
2015 |
3020 |
| |
| Holding
Capacity (Total) |
545 |
965 |
1001 |
1050 |
1540 |
| |
| Holding
Capacity (Column) |
460 |
715 |
826 |
965 |
1455 |
Capacities
listed are wet bushels, shelled corn at listed input moisture
content and are estimates based on drying principles, field
results and computer simulation. Variance may occur due to
grain's physiological factors (kernel size, chemical composition,
variety, maturity), excessive fines, adverse weather conditions,
etc.
Full
heat capacities discharge at 17% content resulting in 15%
final content after steeping and cooling.
|
